Digital Telecom Adaptor Basic
Digital Telecom Adaptor
Crexendo Digital Telecom Adaptor only $44.95 with this plan
Feature Specifications
| Ethernet Ports | 2 RJ45 (LAN/WAN) |
| NTA/Router | Yes |
| DHCP | Client/Server |
| FXS Port | 2 |
| FXO Port | No |
| PSTN Pass-through Port | No |
| Voice Mail indicator | Yes |
| Voice Codec | G.711(a/u-Law) |
| Remote Configuration | TFTP/HTTP |
Technical Specifications
| Telephone Interfaces | 2 FXS ports, 2 SIP accounts |
| Network Interface | 2 10M/100 Mbps, RJ-45 |
| LED Indicators | Power, WAN, LAN, PHONE1 and PHONE2 |
| Reset Buttom | Facotry Reset Button |
| Voice-Over Packet | Voice Activity Detection (VAD) with CNG (comfort noise generation) and PLC (packet loss concealment), Capabilities Dynamic Jitter Buffer, Modem detection & auto-switch to G.711, Packetized Voice Protocol Unit (supports RTP/RTCP and AAL2 protocol), G.168 compliant Echo Cancellation, LEC (line echo cancellation) with NLP |
| DHCP Server/Client | Yes, NAT Router or Switched Mode |
| Fax over IP | G.711 for fax pass-through |
| QoS | Diffserv, ToS, 802.1 P/Q VLAN tagging |
| IP Transport | RTP/RTCP |
| DTMF Method | RFC2833 |
| IP Signaling | SIP (RFC 3261) |
| Provisioning | TFTP, HTTP, HTTPS (pending) |
| Management | Auto provisioning system Support Layer 2 (802.1Q, VLAN, 802.1p), Layer 3 QoS (Tos, DiffServ, MPLS) |
| Power Output | 12VDC, 0.5A / Input: 100-240 VAC/50-60 Hz |
| Environmental Operational | 32°-104°F or 0°-40°C |
| Dimensions (H x W x D) | 25mm x 115mm x 75mm (when laid flat) ; 115mm x 25mm x 75mm (standing up) |
| Short & long haul | REN3: Up to150 ft on 24 AWG line |
| Call Handling Features | Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer, hold, forward, 3-way conferencing |
| Caller ID | Bellcore Type 1 & 2 |
| EMC | EN55022/EN55024 and FCC part15 Class B |
| Safety | UL |
