Hosted Telecom FAQs

Installation/Setup Instructions

How do I attach the base to my phone?

Please refer to the User Guide which can be found on the Crexendo.net website under Support. Click on the installation file for your model of phone.

How do I attach the cables to my phone?

Please refer to the User Guide which can be found on the Crexendo.net website under Support. Click on the installation file for your model of phone.

What does a blinking cable plug in the upper right of the Crexendo Internet Phone display mean?

Your phone is having trouble connecting to the internet. Unplug your phone. Recheck your cables and your internet connection. Plug your phone in again. If you are still experiencing problems contact your System Administrator or ISP.

What does Network Unavailable on my Crexendo Internet Series Phone mean?

Your phone is having trouble connecting to the internet. Unplug your phone. Recheck your cables and your internet connection. Plug your phone in again. If you are still experiencing problems contact your System Administrator or ISP.

I do not receive a dial tone when I pick up the handset on my phone.

Your device relies on both power and internet connectivity to function. If you are experiencing outages on one or both of these, your device will not operate.

• Check for the green Power light in the upper right corner of the display.
• Check all cable connections.
• Unplug the Power cord, wait 10 seconds and then plug it back in.
• Wait approximately 15 minutes after plugging in the phone before picking up the handset. The system is reloading the configuration and will not provide full service until the update is complete. You will know it is complete when your phone displays either your name or an extension number and the date and time.
• If there is still no dial tone AND the phone is connected to the Internet through a cable modem and/or router, reset the cable modem and/or router by unplugging it, waiting 10 seconds and plugging it back in. Then repeat Step 4.
• If still unsuccessful, contact your System Administrator or ISP.

I can hear a dial tone, but I get a “Not Found” when I try to dial a phone number.

There could be two issues:

• You may have an Outbound Dial Code set up. Contact your System Administrator to find out what the Outbound Dial Code is.
• Your phone permissions may be prohibiting you from making outbound calls. Contact your System Administrator to ask if you have Domestic/Canada Calls and/or International Calls inactivated in your account.

During a call, I cannot hear anyone speaking.

• Make sure the volume is turned up.
• Make sure your handset is tightly connected with the phone.
• Contact your System Administrator.
• Contact Customer Support for a check on your router firewall settings.

I can hear my caller, but they can’t hear me.

• Check whether you have muted the conversation or not (Mute button or “X” button pressed).
• Make sure your handset is tightly connected with the phone.
• Contact your System Administrator.

I can make outgoing calls, but I don’t seem to be receiving any calls.

Make sure Do Not Disturb (DND) is disabled. There are two places to check for the DND status:

• If Do Not Disturb is enabled on your phone you will see a DND symbol on the icon row of your display. All incoming calls will show as missed calls.

  To turn off DND on your phone:

  • On the SIP200: press MENU > scroll to 2. Features > press OK > scroll to 6. DND > use the Left and Right Arrows to toggle the Disable/Enable > press OK to confirm your selection.
  • On the SIP300: press the softkey labeled DND from the home screen
• To turn off Do Not Disturb in your Crexendo Web Interface, log in and change the Do Not Disturb status to Available at the upper right corner of any screen.
• If these don’t work, contact your System Administrator.

What do the icons on my phone mean?

Icon	Description
	Indicates you are using the handset
	Indicates you are using the speaker phone.
	Indicates you are using the headset.
	Mute function. On the SIP 200: To turn off/on the mute, use the "X" during a call. On the SIP 300: To turn off/on the mute, use the MUTE key during a call. While on mute the party you are speaking with will not hear anything.
	This icon will flash when you have missed a call. To view call information press OK. When viewing information on a missed call, hit OK to dial, X to delete from your call history, or MENU to return to your home display. In call history, this icon will not be blinking, but still indicates this was a missed call.
	Displays only in your call history. This indicates the call information you are viewing was an inbound call. The number displayed is who called you.
	Displays only in your call history. This indicates the call information you are viewing was an outbound call. The number displayed is what you dialed.
	You have call forwarding activated. To view or disable your call forwarding settings press MENU > go to Features > go to Call Forwarding > you may change your Call Forwarding settings.
	You have activated your Do Not Disturb function. This means you will not receive any incoming calls. To view or change your Do Not Disturb settings on the SIP 200 press MENU > Features > DND > you may change your Do Not Disturb settings. To view or change your Do Not Disturb settings on the SIP 300 use the softkey labeled DND from the home screen.
	You have Auto Answer activated. This means that any call to your device will automatically be answered. The speakerphone will automatically activate. To view or change your Auto Answer settings press MENU > Features > Auto Answer > you may change your Auto Answer settings.
	When blinking, indicates that you have a new voicemail. The MESSAGE button will also be lit. To listen to your voicemail press the lit MESSAGE button. The Default PIN is “1234.” Once you have started listening to your voicemail the mail icon will stop blinking and the MESSAGE button light will turn off.
	Function not available
	Blinking indicates there is a problem with your phone's connection to the internet. Unplug your phone's power and recheck all plugs and cables. Check your internet connection.

Other LCD Screen Indicators

abc	Indicates you are in alphabet mode, all input from the keys will display in lowercase letters.
ABD	Indicates you are in alphabet mode, all input from the keys will display in capital letters.
123	Indicates you are in number mode, all input from the keys will display in numerical form.
Ab3	Indicates you are in alphanumeric mode, input from keys can be lowercase letters, capital letters, or numbers.

Can I take my device with me when I travel?

Yes, you can use your device anywhere you have an internet connection that can support VoIP. To test your connection please go to www.crexendo.com/telecom-support-tools. Depending on where you are connecting, there may be additional fees involved through the Internet Service Provider. Please also be aware that using your device from a new location may impact your ability to connect directly to emergency services through 911. Please review the information on www.Crexendo.com/e911-policy about 911 emergency services with your device.

To change the emergency location for your device, log into your Crexendo Web Interface. Navigate to the Phone category, Device section. Double click on the device you are moving. Under Emergency Location click the blue edit link and enter the new 911 information.

Please be aware, it can take an additional 24 hours for your 911 service to be fully updated.

How do I change the language for my phone display?

The languages available for your phone display are English, Chinese Simplified (only available on the SIP 300), Chinese Traditional (only available on the SIP 300), French, German, Italian, Polish, Portuguese, Turkish, and Spanish.

Press MENU > scroll down to 3. Settings > press OK > press OK again on 1. Basic > press OK on 1. Language > scroll through to select your language > press OK to confirm your selection.

How do I get out of a menu?

Press the MENU button until you return to the default display. The Default display shows the name or extension number, and the date and time.

How do I send an incoming call directly to my voice mailbox?

When receiving a call you can press the “X” button on the phone to immediately send the call to voicemail.

How do I reject calls from blocked numbers?

There are two ways to activate/deactivate the Reject Blocked Calls option:

• In your phone: Press MENU > scroll to 2. Features > press OK > scroll to 4. Anonymous Call > press OK > select the appropriate line using the Left and Right Arrows > use the Down Arrow to find 3. Rejection > use the Right and Left Arrows to toggle Disable/Enable > press OK to confirm selection.
• In your Crexendo Web Interface: Navigate to the Phone Menu > Device Submenu. Double click on the appropriate device. Check the Reject Blocked Calls box. Click Done. This will reboot your phone. Active phone conversations on the edited device will not be interrupted; the reboot will take place after the call is complete.

NOTE: This process will interrupt internet connections to all devices connected through the phone.

How do I put a call on Hold

While on a call press the HOLD button. The person on hold will hear music in the background. On the SIP 300 you may also use the softkey labeled HOLD during a call.

How will I know my call is on hold after I have pressed the HOLD button?

The word HOLD will appear in the LCD screen. The line light to the right of the LCD will also be blinking.

How do I retrieve a call on hold?

Press the HOLD key again to reconnect your call, or click the line key.

Can I block others from seeing my number when I call?

To block your number from showing when you call someone, press MENU > scroll to 2. Features > press OK > scroll to 4. Anonymous Call > press OK > select the appropriate line using the Left and Right Arrows > use the Down Arrow to find 2. Anonymous Call > use the Right and Left Arrows to toggle Disable/Enable > press OK to confirm selection.

How do I answer incoming calls while I’m on a call?

To accept an incoming call while already on a call, press OK. This will put the first call on hold and allow you to speak with the new caller. To disconnect the second call, press the MENU key and then press the HOLD key to go back to the 1st call. You also have the option to switch back and forth between the calls. Press the HOLD key while speaking with the second caller. The display will now display both calls; use the Arrow keys to select the caller you wish to speak with and press the OK button. You can disconnect from the call by pressing the Menu key.

When I am on a call I hear a short beep and the line starts flashing, what is this?

The Call Waiting feature is enabled on your phone. This indicates a new incoming call.

I don’t like Call Waiting, can I turn it off?

Yes, contact your System Administrator or Customer Service for assistance.

Why are calls coming directly to my speaker phone?

Auto Answer is enabled on your phone. You should see AA in the icon bar on your phone display as well, indicating Auto Answer is active. To disable Auto Answer:

Press MENU > scroll to 2. Features > press OK > scroll to 3. Auto Answer > press OK > use the Left and Right Arrows to Enable/Disable Auto Answer > press OK to save selection.

Is there a way to delay Auto Answer from activating the speaker phone immediately?

No, this is not an option.

Can I reprogram the number the Redial button calls?

No, this is not an option. You can add a contact for a frequently used number or use the Hot Line feature if you want your device to always call out to a specific number.

On the SIP 300, you can program speed dial numbers for the 10 blank buttons on the right hand side of the phone unit.

If I push RD will it call the last number that called me?

No, it is the last phone number that you dialed. To access the last number that called you, use your Up Arrow to access the Call History.

What does RD stand for?

Redial.

Do I have a speaker phone?

Yes, a Speaker Phone is an included feature on your Crexendo 200, 300, 230P, 300G Internet phone.

What is the button that looks like a speaker?

This button activates your Speaker Phone. If you are not on a call you will hear a dial tone.

While on a call can you switch between the handset and the speaker phone?

Yes, while using the handset, press the Speaker Phone button and hang up the handset. To switch from the Speaker Phone to the handset, simply pick up the handset.

How do I change my ring tone on my phone?

Press the MENU button > scroll to 3. Settings > press OK > press OK again on 1. Basic > scroll to 3. Ring Tone > press OK > scroll through the ringtones and use OK to make your selection.

Can I set a different ring tone for the separate lines on the same Crexendo Internet Phone?

No, this is not an option. However, you can assign one of the 8 pre-programmed ring tones to individual contacts.

If I do not have access to my device or my computer, is there a way to check my voicemails?

You can call 877-282-4524 from any phone to check your voicemails. It will prompt you for the 10 digit phone number, for your personal extension and for the PIN for the voice mailbox you are checking.

How do I set up my PIN for accessing voicemail?

Log in to your Crexendo Web Interface. Click Options > My Settings. You will find the PIN field under Voicemail Options. Your PIN must be four digits; the default assigned is “1234.”

Is there a speed-dial function?

SIP 230 and 300 Phones have speed dial buttons that can be programmed within the Creexendo Web Interface.

SIP 200 Phones do not have this feature. Hot Line can be used if you want the phone to automatically dial the same number every time you pick up the handset to make an outbound call. Otherwise, utilizing your directory functions in your phone is the best option.

What does the Hotline option do?

This programs your phone to automatically call a particular number as soon as you pick up the handset.

Press the MENU button > Scroll to 2. Features > Press OK > press the Down Arrow to find 3. Hot Line. Press OK. Enter the number to be automatically called. Press OK.

My phone automatically dials a number when I pick it up.

Make sure that the “Hotline” feature is disabled

Press the MENU button > Scroll to 2. Features > Press OK > press the Down Arrow to find 3. Hot Line. Press OK. Use the “X” key to delete the number listed. Press OK.

How do I add a contact to my phone?

• Press the DIRECTORY button. On the SIP 300 this is a softkey on the main screen. On the SIP200 this is the button with the book and (Ab3) under the display.
• On the SIP 200: Press the Up Arrow so that you see . Press OK.
• On the SIP 300: Select 1. Contacts and press OK, and then the Add softkey.
• Use your keypad to enter the name of the contact. You may have to press a number key more than once to get the correct letter. For example, to enter the letter L you will need to press the 5 key 3 times. You can change the input type by pressing the Ab3 button again to switch between Ab3, abd, ABD, or 123.
• To put in a space, press zero (0) twice in quick succession.
• To correct an error use the left or right arrow to move to the erroneous character. The character will flash.
  • On the SIP 200: Press the “X” key to delete the character. Leaving the cursor in the same position, enter the correct letter or number (it will be inserted AFTER the character that is now flashing) and press OK to save. You may also use the “X” key as a backspace.
  • On the SIP 300: Press the “Del” softkey to remove any incorrect characters.
• If you need to enter the same number or letter twice (e.g. the two L’s in “Wells”) pause after entering the first letter/number. Once the cursor moves to the next blanks space enter the 2nd letter/number.
• Once you have finished the name, press the Down Arrow to enter the number. Press OK to save the contact, or use the SAVE softkey on the SIP 300 Phone.

How do I edit or delete a contact in my phone?

• On the SIP 200:
  • Press the DIRECTORY button (Ab3). There are two ways to locate the entry you wish to edit: Scroll using the Up/Down Arrows to find the contact you want to edit/delete. Press any Key. You will see SEARCH: Use the “X” button to delete the number you entered. Type part or all of the name and press OK. (Search is case-sensitive so use the Ab3 key to be sure your search term is in the correct format.) Arrow Up and Down to locate the correct contact. Use the Left and Right Arrows to scroll through DIAL, EDIT, DEL. To edit, press OK on EDIT.
  • To correct an error use the left or right arrow to move to the erroneous character. The character will flash. Press the “X” key to delete the character. Leaving the cursor in the same position, enter the correct letter or number (it will be inserted AFTER the character that is now flashing) and press OK to save. You may also use the “X” key as a backspace.
  • If you need to enter the same number or letter twice (e.g. the two L’s in “Wells”) pause after entering the first letter/number. Once the cursor moves to the next blank space enter the 2nd letter/number.
  • To delete, press OK on DEL. Note: Your Crexendo 200 Internet Phone does not ask for confirmation before deleting a contact. If you delete something by accident you must manually enter it again.
• On the SIP 300:
  • From the home screen, press the softkey designated Directory.
  • Press OK or “Enter” on selection 1. Contacts
  • You can scroll through contact entries or press any number to bring up the search box. If you use the search box press ok once you have typed your query.
  • To edit an entry: Press OK or the Option softkey and select Detail, or the Send softkey.
  • To delete an entry: Press the Option softkey and use the down arrow to select Delete, then press OK.

What kind of headset is compatible with my Internet Phone?

Add link to Recommended Equipment page

Where do I find the password for the “Advanced Settings” section of the phone?

The “Advanced Settings” section is strictly for the Manufacturer’s use. Please do not attempt to access this portion of the phone.

Using your Crexendo Web Interface

What is the order that I should add extensions, users and groups in the Crexendo Web Portal?

Please refer to the User Guide which can be found on the Crexendo.net website. This document will help you understand the order in which Users, Extensions, Hunt Groups, Auto Attendants, and Contacts should be created.

I’m going to be in and out of the office all day, but I don’t want to miss my calls. Can my system ring both my Device and my cell phone?

Yes

1. Log into your Crexendo Web Interface
2. Go to Options > My Settings
3. Add your cell phone number if it is not already added
4. Under Statuses click Add
5. Name your new Status (e.g., “Find Me”) and click Add
6. Select your Mode
   • Simultaneous Ringing means it will ring the numbers added to the list all at the same time
   • Hunting means it will ring the numbers in sequential order
7. Add all numbers you want the call to be forwarded to, including the personal extension.
8. Click Done
9. Change the Status in the upper right corner of any screen from your current status to your new status.

Is there a way to set or change the Hunt Timeout (e.g., when it goes to VM) for a personal extension?

You may edit the Hunt Time of a Personal Extension within the extensions submenu. Double click on the appropriate Personal Extension and use the drop-down menu to alter the hunt time. Options range from 5 seconds to 3 minutes.

Can I change the name on the display for my Crexendo phone?

• Within your Crexendo Web Interface, go to the extensions submenu. Double click on the primary extension associated with the Device or Line that you want to alter. Editing the Name field in this screen will change the display name on the phone screen. This will reboot your phone. Active phone calls on the edited device will not be interrupted; the reboot will take place after the call is completed.
• If the above method does not change the display name, that line may already have a label override in place. Go to the Device Setup submenu of the Phone Menu in your Crexendo Web Interface. Double click on the appropriate device. Enter the desired name in the Label Override field. This will reboot your phone. Active phone conversations on the edited device will not be interrupted; the reboot will take place after the call is complete. Click here for detailed instructions.

NOTE: This process will interrupt internet connections to all devices connected through the phone.

Why do I keep hearing the phone beep even though I’m not on a call?

The beeping noise means you have an unheard Voicemail message.

How do I check my missed calls?

• Press the Up Arrow on your device to scroll through your missed calls
• Press the OK button to dial the number
• Once you scroll through all your missed calls, the missed call icon will disappear.

Where can I add an additional phone number to the system?

Within the Crexendo Web Interface, navigate to the Numbers submenu under Phone. Click the Gear button to the right of Company numbers and select the Add option. Search for numbers by entering your area code, and then select a number from the list. There is an additional charge for every phone number added. Please see the Crexendo.net website for details.

Can I direct the phone to ring to a group of people sequentially so that if one person cannot answer it will ring the next?

This functionality can be managed by creating a Hunt Group. Please refer to the Quickstart Guide which can be found on the Crexendo.net website to create a Hunt Group.

How do I transfer a phone number on another system to my Crexendo system?

You may wish to transfer or “port” a phone number that is billed to you by another carrier to the Crexendo Web Interface for business purposes. This means it will be assigned an extension type and extension number and can be used in Hunt Groups or the Auto Attendant. We call this Local Number Porting.

To port a number, go to the Phone Main Menu and click the Numbers Submenu. Click the Gear button next to the Company Numbers Heading and select Port a Number. The Port a Number wizard will display. Please read the important information on the first screen before clicking the Next button. Help for this process can be found by hovering over the blue information icons found on each screen.

Is there a quick and easy way to forward all of my Phone Messages to an internal or external email address?

It doesn’t get easier than this! Under the Phone Main Menu, click Rules. At the top of the screen is a box which says “Forward all phone messages to this email address”. You may either select an internal email address from the dropdown list or select “Other” and enter an external email address.

How do I make a conference call?

There are a couple of different ways to make a conference call depending on how many participants you want to host in the call.

Creating a Conference Extension within the Crexendo Web Interface will let you host up to ten participants in a call and works with all of the Crexendo Devices

Can my customers select from a list of Names or Extensions to reach me or my employees?

Yes! Directory Extensions let your customers type all or part of either an Extension Number or a User Name in order to reach that exact individual. Contact your System Administrator of Customer Support for assistance.